Farm Equipment

Combine Cleaning

Of all the farm jobs, the one I hate the most is greasing the combine.  Its not the maintenance I hate, its the fact that there is no way in the world to perform the maintenance or repairs on a combine without getting filthy.  Combines are dirt magnets.  Not just dirt magnets, but the most powerful dirt magnet in the world.  Dirt will accumulate out of no where and to a depth that seems impossible for such a short time of use. It’s the kind of dirt will cause you to itch like crazy.

This dirt is also dangerous.  It can catch fire and burn if it is an area that gets hot.  Especially if it accumulates in those areas.  So besides being a nuisance, dirt and dust are also a fire danger. 

Matthew is becoming the official combine operator.  Note the word operator, not driver.  My new motto is that if you drive it, you clean it.  If Matthew will clean it, I will repair and perform maintenance on the clean equipment.  Fair enough exchange I think.  Besides, Matthew loves to use the power washer and he doesn’t mind getting wet and dirty in the process. 

So Matthew washes today and tomorrow and then we hook up the corn head and wash it.  Then I will begin the process of performing maintenance and greasing the head and box while Matthew cleans up the cab.  By the time this operation is done, we should be ready to get grain bins in order and set augers for corn harvest.

Then we wait.  Wait for the corn to dry down.  I suspect that we will be shelling corn by the first of September. 

Ahh, shelling corn, my second favorite thing to do on the farm.  Second only after side-dressing corn with nitrogen.  Funny you get to do the second favorite thing after doing the first hated thing.

How far we have come.

Was cleaning out a bunch of junk from under my desk trying to find a bunch of other junk when I came across a milk crate full of old equipment manuals.  I had took them out of the shed when we cleaned the shed out last winter and had forgot all about them.

There is a manual for just about everything it seems.  All of them for equipment we don’t have anymore.  Technology changes, thank goodness.  I would hate to have to harvest on a combine with no cab!  Not only that, but our efficiencies and our productivity increases when we adopt new technologies. 

So, it is still amazing to me when some of the older generation out there doesn’t get it about technology.  Yes, it costs money.  But just because something worked then doesn’t mean it works now.  Or maybe it works but it is not efficient or as productive.  Maybe we didn’t have a choice “back then” and we do now.  Maybe to be competitive we don’t have a choice but to adopt the newest technology, no matter short lived it might be. 

GPS is one of those technologies that has brought about change.  Chemicals are another.  Things have changed greatly, but in some respect they haven’t changed all the much lately.  You don’t see many cultivators anymore.  You don’t find anyone with a rod and chain for measuring off acres.  Yet there are those who say that cultivation is better than chemicals.  There are also those who say that we don’t need all this GPS stuff to farm with either. 

Those few loud voices are right to some extent.  We don’t need all of the latest and greatest technology to farm.  But it sure makes it much easier.  And it makes it more productive.

What do you do?

Ever wonder what to do when you don’t know what to do?  You know you need to do something but don’t know what it is.  Well I am there today.

Lt Gen Hal Moore, the Commander of US forces in LZ X Ray in Vietnam, whose story was made famous in the movie We Were Soldiers, says that there is always one more thing you can do.  He always says to trust your instincts, follow your gut, not your heart.  That is kind of contrary to what we have been told in the world, that we should follow our heart.

So hear I sit, needing to make a decision on weed control, particularly one field of seed beans.  I knew it was coming, but I have been delaying it, thinking I could out-think it.  My heart tells me to find a way to control the weeds other than to spray another application of the same weed control.  This “alternative” method involves spending more money and might not work as well as I have it in my mind.  The heart will lie to you, to get you to take a chance, because you want something to work. 

My gut tells me that no matter what I do, I have lost yield that I will not get back.  That’s reality.  It also tells me that I have enough chemicals left over that are already paid for to nuke those weeds. Then, if they survive, or not, I did all I could do.  My gut also tells me that, if it doesn’t rain, it won’t matter which road I travel.  Reality again. 

My gut also tells me that I can take them out next year with tillage and the corn chemicals easier and cheaper than I can with a new piece of equipment and a hope that crazy idea would work. 

When I get off jury duty this week, I am going with my gut.  So if you see a bright flash and mushroom cloud North and East of Benton, you will know that I nuked them.  Those that survive, survive to fight another day.  And if I don’t kill the beans, and it rains, well we might just make something yet!

Mechanics for green tractors.

Is there a requirement that one must become a complete jerk to be a green tractor mechanic? 

Oh for one competent green tractor mechanic that doesn’t come with the attitude.  Then again those without the attitude hardly know its a tractor……….

Parts changers they be.  Not a mechanic one. 

Ah, I feel better………..

Is RTK oversold?

There is a lot of press on RTK right now.  RTK is that super accurate GPS correction, survey grade, to plus or minus a half centimeter.  It is pretty impressive.  It is also pretty expensive.  It is also, in my opinion, being over sold.

Accuracy is addictive.  Just ask any target shooter.  I admit that accuracy with a rifle is addictive.  Being able to cut the same hole at 100 yards with my rifle is a goal.  Its more about the man than the machine with a firearm.  Yes the tolerances in the action and barrel along with the consistency in the load help to get better accuracy, but its more about if you can hold still, hold that same point of aim, and control the trigger than anything else.

With GPS, it’s all about the correction signal, not the GPS signal.  It is all the machine and nothing to do with the man, minus the initial calibration, which a lot of people don’t do correctly.  The more accurate the correction signal to the GPS unit, the more precise your implement will be in the field….assuming you calibrated it correctly. 

And what are you doing with that level of accuracy?  If you are not saving A B lines and moving them from machine to machine, or if you’re not employing management practices that require you to be that accurate, like ridge till, or you’re not using the mountain of data that is collected by the controller with that type of accuracy, then you have just blown a bunch of money for something that is underused. 

I use the analogy that its like using a Barret .50 cal Sniper Rifle to shoot chipmunks.  Impressive, but a bit of overkill at $10 something a shot vs. a .22 at something like $0.10 per shot.  Yeah, you have to be a little more accurate with your .22 than the .50 cal, but the chipmunks can’t tell if they have been shot by one or the other. 

So, why then do so many farmers bypass the WAAS system with its lower accuracy level to do RTK when they don’t do anything other then drive straight?  Like the illustration above, you have to be a bit more precise in you calibrations but no one can tell the difference in +-.5 cm vs. +-3 inches at 6o mph while driving by your fields.  A lot of times that pass-to-pass accuracy is even better with WAAS, than what is advertised.  Again, it’s in the calibration of the machine, not the correction signal.

Don’t get me wrong, when it is properly employed, RTK can make your life and farm more profitable.  But I have yet to see a farm that exploits RTK to its fullest potential.  Most of the time, its just used to match up equipment of different widths for convenience of planting or harvest.  And if that is the only use you have for RTK, you’re losing out on a bunch of real benefits other than being able to run your 12 row planters and combine with your 8 row head. 

He who learns to exploit the accuracy and data goldmine of RTK will win the race to greater profits.  And those that don’t are shooting chipmunks with a .50 cal, impressive but wasteful and expensive toys.

Field Expedient Repair

I have been trying to spray 100 acres for two days to help a friend out.  OK not a full two days,  just yesterday afternoon and this morning.

I usually takes me about an hour to an hour and a half to spray 40 acres with my ATV sprayer.  I use this because it is a) cheap to operate and own b) easy to handle and use in small crops and c) saves me about $7 an acre for simple spraying like first pass or pre plant or post spraying.  It also allows me to do tip toe across some wetter ground and not rut it up. 

In my friends case he has several small fields that custom applicators don’t like to spray, you know several 5, 7 10 acre fields.  Last year he had them spray and they didn’t even spray a couple of the fields because they “couldn’t get in them”.  What ever………

So late yesterday afternoon we headed to the fields on his farm.  We didn’t even get to the end of the driveway before the Honda motor threw a rod on the sprayer pump.  That motor has several acres and hours on it so it was no surprise, you know, one of those things where it was going to happen……..

Then the hitch on my ATV broke and left the sprayer in the field but pulled all the wiring off the controller.  So we quit last night and let it be. 

I drove the last load of Canola to Golden Gate this morning and then went to Jim’s farm and rewired the controller and got hooked back up and went to spray the last 30 acres.  About half way done I looked over to see the outer third of the left boom begin to fall off.   Yea……..more repair fun.

I managed to get it held together enough to drive to Jim’s shed where I began to look for some scrap metal or metal angle iron or strap to make a temporary repair so I could finish until I get it home to rework the boom.  Well I began to question if Jim is a “real” farmer because he doesn’t have the obligatory scrap pile of metal outside his shed to scrounge from.  Matter of fact his shed, inside and out are to neat and well kept………….just a side note there.

Well after some searching I finally found what appeared to be a large U bolt that had been cut in two laying in the gravel near the shed door and used them as a brace to weld the boom back on to finish.

It worked.  I had no doubt.

Amazing what one can do with a welder, couple pieces of scrap metal and a little bit of knowledge.  I know some of your will complain or point out that I “didn’t do it right”.  Well when you MacGyver something, the beauty is in the eye of the fixer!

We roll along…..the end is in sight!

 

Day 5 of winter wheat/canola harvest continues.  First was son Matthew becoming a wheat cutter and now expert combine operator at harvesting standing canola.  There is a word for standing canola, but I cant remember it right now.  He has mastered the art of it at the age of 12.  I am proud.

 

Next was my wife Lori learning how to run the tractor and autosteer and drilling beans yesterday.  She kept the drill going all day and got us in good position to get it caught up with the combine today. 

The field of canola we are in now is Hornet and is making pretty good, maybe even better than the best field of Citro.  Would like to get it done today while I have a trucker still available.  Will loose him for a few days starting tomorrow.

Anyway here are two videos I shot yesterday, one of me using the autosteer while drilling beans and the other of Mrs Lori making a pass in the field drilling herself.  Sorry for no fancy editing, not enough time last night to get it done. And yes to my friends, I listen to NPR while drilling beans, it keeps me from going postal during the day. Something about the mellow tone and sounds, they relax me!

Monday Morning, again.

I threw in the towel on Sunday. I just couldn’t got any more. After church we went to eat some Mexican and then home where I spent an hour finishing a two year old job, which was to build a pergola on our deck for Lori. Instead, she got a “gazebo”, one of those Menards fancy lawn tents, with sides and such, on the deck.

It took me an hour to put it up and to be honest it nearly killed me. My arms and shoulders were toast from working on the combine the last three days. When that was done, I took a nap for a few hours. Me and naps are not a good idea. I always wake up feeling worse than before I took the nap. Again this was the case but at least I was able to keep my eyes open.

Anyway after spending three days up the rear end of the combine trying to get all those parts in it I have hit a snag. Kind of like Christmas gifts that require assembly and don’t come with all the parts, well that is where I am……..in need of help.

So today I am calling in the cavalry so to speak. Maybe we can finish it up pretty quickly with some help and move on to getting ready to cut the canola.

So many things to do and so little time it seems, but that is normal this time of year.

Done with full season soybeans

Got done planting my full season beans yesterday.  Ed Winkle would be proud of me, I no tilled most of them and stale seed bedded the rest.  It was a little rough but planted well and they should be up quick with the warm temps and moisture.

Ag Fact:  Soybeans came to the US in 1804 as ballast in a ship returning from China.  100 years later Geroge Washington Carver developed 300 products from soybeans and peanuts, but not peanut butter.  (from Fainting Goats and Malted Milk)

All thats left is spraying, cutting the canola and wheat and double cropping beans afterwards.

But now to get ready to do that…………….

  • Get grain truck fixed and inspected
  • Install new chopper in combine
  • Get the seed wagon ready
  • Get the auger wagons ready
  • Get the auger ready
  • Make arrangements to get the canola hauled
  • Wait for the bean market to go up so I can sell the canola

That’s enough to make me tired again…………

Weekend of distruction or weekend of clean up?

We spent the weekend tearing down an old barn on the farm. I was surprised how fast the work went for the most part. Needless to say that we were all tired and sore afterwards. Lots of nails to pull, barn tin to pull and old rough cut lumber to save.

But between the Cat and the backhoe, it was short work getting it down and cleaned up. Now just to take the concrete up and use it to make a dry water crossing from one field to another.

 

Anhydrous Video

Well here is my first video with the complete reinstall of all my software.  Movie Maker and Windows Media Player 11 still don’t work right, if at all on my PC so I down loaded Cyberlink PowerDirector trial version to see if it would work and guess what, IT DID!

Not the best quality video I have ever made but here but two things:  First I was using the trial version and second I haven’t learned the quality settings very well yet.  Having said that, it is much easier to use than Movie Maker and gives you a lot more options…………..

I am going to make another video and see how it does then I will most likely buy the full blow version!

Still trying to salvage the autosteer footage for a video, keep your fingers crossed.

Anyway, heres the video………

First Welding Lesson

Matthew got his first welding lesson on Sunday afternoon. 

Between myself and his Great Grandpa he got a lot of advice that I am not sure he understood completely.  But he did weld and weld well for his first attempt.  He welded good enough to weld the metal bracket on his go cart for the throttle control.

He also got some experience welding with the stick welder and the wire welder………

Good job Matthew!

Long Day, lots of water

Drove over to Owensboro, KY to Agrimart this morning to get some parts for the anhydrous rig.  If and I do say if, the sun shines and the rain don’t fall no more I might, might get in the field Friday to put on some gas.

All the way over there I could not get over the amount of water that was laying in some fields.  I also couldn’t get over the way some of the creeks and drains looked from the amount of water they had through them.  Mike at Agrimart said they had 5 plus inches of rain there.  I would guess that was pretty normal from about Norris City in Illinois east to Owensboro. 

Anyway, long day, tired, no pictures to share, no good stories to tell so its time to go to bed.

Something better tomorrow to post.  Promise.

Video of Yesterday

if you only knew how much trouble this was to do.  I had all kinds of codec problems with my recorder, player and movie maker.  But I whipped it……….also video between camera and phone didnt help things……..

First day of corn planting 2010

Got the first day of corn planting in for the 2010 corn crop.  Ground worked like a dream and the corn planted like one also.  This is the earliest I have ever planted corn.  10 days earlier than the “old record”. 

The field I was in was fall ripped with a V ripper and left rigged up all winter.  Then today we hit it twice with a field cultivator and crumblier.  A bit of grass but I am not worried about that.  Between the row cleaners on the planter and the herbicide that shouldn’t be a problem. 

Seed was placed almost a perfect inch and three quarters deep.  Should be good to go with plenty of moisture and some firm ground to push against.  Pioneer 33N58.  The highest yield on the farm the last few years. 

The dust was even flying by days end.  Something that has not happened during corn planting for several years now.

UPDATES!

CORN HARVEST IN PROGRESS!

Twitter
Categories